[ Photos from users for the year 2013 ]
Here is the layout of my Stiletto 23. We sailed the boat prior to the addition of spinnakers or Code 0's, so there is no rigging for that. The jib sheet was set up with a 2:1 for tacking and a 4:1 for continual trimming without excessive fatigue. We could also adjust the jib lead inboard and outboard from the weather side; and had barberhaulers to pull the lead outboard downwind, when the jib clew was too loaded to hand hold. You can also see the mainsail downhaul at the base of the mast, led to both sides of the boat; and the mast rotation controls led far enough aft to rotate the mast 90 degrees to centerline.